Maintenance measures for drilling machinery and equipment

First, during daily maintenance, attention should be paid to keeping the surfaces of mechanical and petroleum machinery equipment dry. During normal use of these equipment, some sediments will inevitably be left behind. The residue of these substances will increase the wear and tear of the equipment during operation.  causing equipment loss; at the same time, the temperature rise and fall of the bearing equipment and friction parts of the equipment, as well as the gear box and hydraulic oil tank should be observed at any time. The temperature of each part should not be higher than 70°C. Once the temperature is higher than this, the equipment must be shut down. to lower the temperature and find the cause of this problem in time.

Second, check the sealing condition of the equipment regularly. Once oil leakage is found at the seal of the equipment, shut down the equipment promptly and seal the oil leakage. In addition, the connecting firmware at each connection must be checked regularly, such as If there are any loose parts, they must be reinforced in time.

Third, check the performance of each hose regularly. After working for a period of time, these hoses will dry out and become swollen. When this happens, these hoses should be replaced in time and the inside of the fuel tank should be checked frequently. If the oil has deteriorated, add hydraulic oil in time. At the same time, the hydraulic system should be checked frequently. When the filter element pointer points to the red zone, it proves that the filter element is clogged. Stop the machine immediately and replace the filter element to avoid damaging the oil pump or motor. In addition, the pressure gauge should be replaced in time when it fails.

The management and maintenance of oil drilling equipment is extremely important for oil companies. It is related to whether the oil company can work normally. The management and maintenance of these equipment must fully take into account the actual characteristics of the oil company.